Aluminum Welding in Fort Worth, TX
Monroe Mobile Welding brings the welder to aluminum boats, trailers, truck beds, ramps, and tanks across Dallas–Fort Worth, with more than 1,200 projects finished since 2012.
Call, say it’s aluminum, and tell us where it’s parked. We’re often there within an hour.
5.0 on Google
- Open
- 24/7Weekends too
- Arrival
- Often within an hourAt your boat, trailer, or truck
- Rate
- $100–$300An hour
- 5.0 starsFrom our customers
Finding a welder who’ll take on aluminum is the hard part
Plenty of welding rigs are set up for steel only. Bring up a cracked aluminum boat trailer or a split truck toolbox, and you hear “haul it to a shop” or “we don’t do aluminum.” Customers around Dallas and Fort Worth say the same thing in their reviews of other welders: someone who can weld aluminum isn’t easy to find, and some who say yes don’t have the equipment.
Monroe Mobile Welding welds aluminum where it sits, at your house, ranch, storage lot, shop, or job site. You don’t tow a broken trailer anywhere, and you don’t wait on a shop’s schedule. Owner Chad Monroe has run the business out of north Fort Worth since 2012, and it’s open 24/7.

Quick answers about aluminum welding
Can you weld aluminum on site?
Yes, where it sits.Monroe Mobile Welding welds aluminum at homes, ranches, shops, and job sites across Dallas–Fort Worth. Tell us it’s aluminum when you call so the right setup comes on the truck.
How much does aluminum welding cost?
$100 to $300 an hour.Monroe Mobile Welding charges $100 to $300 an hour for aluminum work, the same range as our steel work. Describe the part and the damage when you call.
How soon can a welder get to me?
Often within an hour.Monroe Mobile Welding is open 24/7 and is often on site within an hour of your call. Jobs farther from our north Fort Worth base take longer to reach.
Do you weld aluminum boats and boat trailers?
Yes.Monroe Mobile Welding repairs aluminum boats and boat trailers in the driveway, the yard, or the storage lot, so you don’t tow a broken trailer to a shop.
Why aluminum takes a different setup than steel
A welder set up only for steel can’t lay a clean weld on aluminum. Three things make the difference, and they’re why so many welders turn aluminum away.
-
The oxide skin melts at about 3,700°F
Aluminum grows a thin oxide layer in open air. That layer melts at about 3,700°F, while the aluminum under it melts at about 1,200°F. The joint gets degreased and scrubbed with a stainless brush kept only for aluminum, or the weld traps dirt and turns porous.
-
TIG or a spool gun, not a steel wire feeder
Soft aluminum wire doesn’t push well through a long MIG lead, so aluminum MIG work runs from a spool gun that holds the wire right at the torch. TIG welding feeds the filler rod by hand, and its AC arc etches the oxide off as it goes.
-
Heat spreads fast, so it has to be controlled
Aluminum carries heat almost as well as copper. The whole part soaks up heat as the weld goes, so the welder backs off partway through to keep the puddle from washing out or burning through thin sheet.
Stainless steel needs its own setup too. See stainless steel welding for rails, tubing, and tanks in stainless.
Aluminum jobs we weld on site
These are the aluminum repairs that come up around Dallas–Fort Worth. Each one gets welded where it sits.
- Boats and boat trailers. Cracked trailer frames, cross members, fender brackets, and broken fittings on aluminum boats. Steel trailers have their own page: trailer welding and repair.
- Truck beds and toolboxes. Aluminum flatbeds, headache racks, and crossover toolboxes with a split seam or a torn-out mount.
- Ramps. Loading ramps and trailer ramps that cracked at the hinge, a rung, or the lip.
- Tanks. Aluminum tanks with a cracked seam, bracket, or fitting.
- Railings. Aluminum stair rails and porch rails, and the posts and brackets that hold them up.
- Since
- 2012Owner Chad Monroe
- Projects
- 1,200+Across Dallas–Fort Worth
- Certified
- AWSOur welders
- Insured
- LiabilityOn every job
What an aluminum repair visit costs, and how it runs
You pay $100 to $300 an hour for the time on your job. Rates, and what moves a job up or down that range, are on our mobile welding cost page.
Call (214) 501-8864
Say it’s aluminum, what broke, and where it’s parked or installed. Call any hour; we’re open 24/7.
We drive to it
Driveway, storage lot, ranch, shop, or job site. We’re often there within an hour.
Clean, weld, and check
The joint is cleaned down to bare aluminum, welded, and looked over with you before we pack up.
What customers say about Monroe Mobile Welding
Word for word from Google, where Monroe Mobile Welding holds 5.0 stars.
“For all your welding needs get with Monroe Mobile Welding. He is very professional, he does a great job in a timely manner. I highly recommend this guy.”
“Respectable guy with alot of knowledge and skill in his trade. Recommended every time.”
“100% Quality welds and fast work”
More questions about aluminum welding
Why is aluminum harder to weld than steel?
The oxide skin and the heat.Aluminum’s oxide skin melts near 3,700°F, about three times hotter than the metal under it, and the part spreads heat fast. Monroe Mobile Welding cleans each joint to bare metal first and controls the heat as the part warms.
Can you fix it before my trip this weekend?
Often, yes.Monroe Mobile Welding is open 24/7, weekends included, and is often on site within an hour. Call as soon as you find the crack, so the boat trailer or truck is ready before you leave.
What should I do before the welder gets there?
Clear the space around it.Empty the toolbox or truck bed, and park the boat or trailer where a truck can pull up beside it. Monroe Mobile Welding does the cleaning and prep of the joint itself.
Are your welders certified and insured?
Yes, both.Monroe Mobile Welding’s welders are AWS certified and hold AWS D1.1 for structural steel, AWS D1.2 for aluminum, and API 1104 for pipe. The business carries liability insurance on every job.
Need aluminum welded where it sits?
(214) 501-8864- Open 24/7, often on site within an hour
- [email protected]
- Monroe Mobile Welding, 2080 Eagle Pkwy, Fort Worth, TX 76177. We come to you.