Mobile Welding Cost in Fort Worth, TX
Monroe Mobile Welding charges $100 to $300 an hour to weld at your site anywhere in Dallas–Fort Worth. We’ve finished more than 1,200 projects since 2012.
Call with photos, the metal, and where it sits, and we’ll tell you where your job should land in that range.
5.0 on Google
- Rate
- $100–$300An hour
- Arrival
- Often within an hourWe come to you
- Open
- 24/7Nights and weekends
- Certified
- AWS D1.1 · API 1104Our welders
The short answers on welding prices
We read 48 one- to three-star Google reviews of other welders around Dallas–Fort Worth, and 10 were about price: no number until the work was done, or a bill bigger than the phone call. Here’s how our price works before you dial.
How much does a mobile welder charge per hour?
$100 to $300 an hour.Monroe Mobile Welding charges $100 to $300 an hour anywhere in Dallas–Fort Worth. The metal, how hard the break is to reach, and how long the weld takes decide where your job lands.
Is mobile welding more expensive than a shop?
By the hour, usually yes.FlexCrew’s 2026 price guide puts field welding $20 to $40 an hour above shop rates. With Monroe Mobile Welding, you don’t tow a broken trailer, pull a gate off its posts, or haul a machine anywhere.
How do I get a close price over the phone?
Send photos and tell us the metal.Monroe Mobile Welding prices from what you tell us: a photo of the break, one of the whole piece, the metal, where it sits, and how soon you need it. Email photos to [email protected].
How does that rate compare with other DFW welders?
It starts at the Dallas field rate.FlexCrew’s 2026 guide puts Dallas field welding at $100 to $150 an hour. Monroe Mobile Welding starts at that $100 floor, and our $300 top sits above the guide’s standard field figures.
What sets your price inside $100 to $300 an hour
Four things decide where a job lands in the range. Thumbtack’s guide to hiring a mobile welder names the same ones, so you can hold any welder’s quote up against them.
- The metal. Mild steel is the everyday weld. Aluminum and stainless steel need a different setup, and price guides list that work higher.
- Getting to the break. A trailer tongue in an open driveway is quick to reach. A beam overhead, a crack under a loaded machine, or a gate on a slope takes setup before the arc starts.
- New metal or not. Welding a crack uses the steel that’s already there. A new hinge, plate, gusset, or length of tube adds that metal to the job.
- How long the weld takes. The rate is by the hour, so time on the job matters most. A snapped gate latch is a short visit; a set of frames can run into the next day.

Welder hourly rates around Dallas–Fort Worth, and where ours sits
We read the websites of five other mobile welders around Dallas–Fort Worth in November 2026. None posted an hourly rate on its home page, and four offered a free estimate instead. The published price guides do give figures.
- Dallas field welding
- $100–$150 an hour
FlexCrew, 2026 - Emergency and after-hours, national
- $125–$200+ an hour
FlexCrew, 2026 - Texas field work, statewide
- $85–$200 an hour
MobileRigPath, August 2026 - AWS-certified structural, Texas
- $120–$175 an hour
MobileRigPath, August 2026 - API 1104 pipeline, Texas
- $150–$200+ an hour
MobileRigPath, August 2026 - Aluminum or stainless TIG, national
- $100–$150+ an hour
MetalWeldHub, August 2026
Monroe Mobile Welding’s mobile welding rates start at $100, the bottom of the Dallas field range. Our $300 top sits above the highest figure each guide prints. Our welders also hold both certifications the guides price highest: AWS D1.1 for structural steel and API 1104 for pipe.
Sources: FlexCrew, “Average Welding Cost Per Hour,” updated August 27, 2026. MobileRigPath, “Mobile welder cost in Texas,” August 18, 2026. MetalWeldHub, “How Much Does Welding Cost Per Hour?,” August 16, 2026.
Have these ready and the phone estimate comes close
The more we know on the call, the closer our estimate is to the bill. Six things do most of the work.
- Two or three photos: the break up close, and the whole piece so we can see its size. Email them to [email protected].
- The metal. A magnet sticks to steel and won’t stick to aluminum or most stainless. If you can’t tell, say so.
- What broke and how: a crack, a snapped weld, a bent piece, or metal worn through.
- Where it sits: the address, any gate code, and whether it’s in a yard, up high, under a machine, or on the shoulder of a road.
- How close our truck can park to the break.
- How soon you need it: right now, or a day that suits you.
How a priced call runs
Three steps from the call to the finished weld.
Call (214) 501-8864
Describe the job and send the photos. We’re open 24/7, nights and weekends included.
Hear the estimate
We tell you where in $100 to $300 an hour your job should land, and about how long it’ll take.
We weld it where it sits
We’re often on site within an hour. Our AWS-certified welders do the repair on the spot.
What customers say about the price
Four Google reviews of Monroe Mobile Welding that mention the price, word for word.
“Chris has preformed great quality work every time. Very competitive pricing always my go to guy to get the job done right the first time.”
“I definitely recommend this guy. He does great work and is up front about everything. He got me taken care of quick.”
“His attention to detail and professionalism set him apart, and he works quickly without cutting corners. On top of that, his pricing is fair and competitive.”
“Top quality work and competitive pricing.”
The welding jobs this rate covers
Every service below is billed on the same $100 to $300 an hour. Each one has its own page on what the work involves.
-

-

Trailer Welding & Repair
Cracked tongues, broken hitches, bent frames, and ramps on utility, car, and livestock trailers.
Trailer repair -

Structural Welding
Beam, column, and bracket welds by welders certified to AWS D1.1.
Structural welding -

Stainless Steel Welding
Stainless handrails, tubing, tanks, and fittings welded where they’re installed.
Stainless welding -

Heavy Equipment Welding & Repair
Loader arms, dozer frames, and excavator bucket hardfacing in the field.
Heavy equipment repair -

Gate & Fence Welding
Sagging gates, broken fence panels, and loose railings fixed in place.
Gate and fence welding
Call for an estimate on your job
(214) 501-8864- Open 24/7, often on site within an hour
- [email protected]
- Monroe Mobile Welding, 2080 Eagle Pkwy, Fort Worth, TX 76177. We come to you.