Skip to content

Heavy Equipment Repair & Welding in Fort Worth, TX

Monroe Mobile Welding drives a certified welder to excavators, loaders, dozers, and skid steers across Dallas–Fort Worth, at any hour. We’ve finished more than 1,200 projects since 2012.

Call any hour, tell us the machine and what cracked, and we’re often on site within an hour.

5.0 on Google
Excavator bucket raised over a dirt job site, its teeth and cutting edge facing the camera
Open
24/7Nights and weekends
Arrival
Often within an hourAt the machine
Rate
$100–$300An hour
Certified
AWS D1.1 · API 1104Our welders

A broken machine stops the whole crew

When an excavator boom cracks or a loader arm tears loose at a weld, the operator, the dump trucks, and the crew behind them all stand and wait. Hauling the machine to a shop means booking a lowboy, loading it, and going without it for as long as the shop’s line runs.

Monroe Mobile Welding brings the repair to the job site instead. Our welding truck carries the welder and gas bottles to the machine. The weld goes in where the machine is parked, and your crew keeps working.

  • Cracked excavator booms and sticks
  • Torn loader arms and frames
  • Cracked dozer blades and blade brackets
  • Broken skid steer attachments and quick-attach plates
  • Worn excavator buckets, teeth, adapters, and cutting edges
Monroe Mobile Welding welder in gloves welding on a yellow excavator arm on a dirt job site
Welding an excavator where it was working.

Quick answers on heavy equipment repair

Can you repair heavy equipment on the job site?

Yes, at the machine.

Monroe Mobile Welding drives a welding truck to your excavator, loader, dozer, or skid steer anywhere across Dallas–Fort Worth, often within an hour. The machine never rides a lowboy to a shop.

How much does heavy equipment welding cost?

$100 to $300 an hour.

Monroe Mobile Welding charges $100 to $300 an hour for heavy equipment repair across Dallas–Fort Worth. Tell us the machine and the damage when you call (214) 501-8864.

Can a cracked boom or stick be welded?

Often, yes.

Monroe Mobile Welding’s AWS D1.1 certified welders grind the crack out to clean steel and weld it back full depth. A boom bent out of line or a pin bore worn oval needs straightening or machining, not only a weld.

Do you fix equipment at night or on weekends?

Yes, any hour.

Monroe Mobile Welding is open 24/7. A machine that breaks on a Friday afternoon can be welded and back at work before Monday’s shift starts.

Excavator bucket hardfacing and bucket repair

Hardfacing is a layer of hard, wear-resistant weld laid over the steel that scrapes the ground, so the dirt wears down the weld instead of the bucket. Monroe Mobile Welding lays it on excavator buckets on site, along with the edge, teeth, and wear plate work a worn bucket needs.

The bead pattern follows what you dig. Stringer beads running with the flow of material suit rock. A crosshatch pattern traps clay and sandy dirt, so packed soil shields the steel. Dots go on thinner plate where heavy beads would warp it. Tell us your ground when you call.

Rebuild a bucket while its shell is still sound. Once the floor wears through or the sides split, it’s time to price a new bucket.

Monroe Mobile Welding welder working on an excavator bucket on site, the machine’s tracks beside him
Bucket repair done next to the excavator.
  • Hardfacing

    Wear beads on the lip, sides, heel, and floor, laid in the pattern that suits your ground.

  • Cutting edges

    A worn or cracked cutting edge cut off and a new weld-on edge welded to the bucket, side cutters included.

  • Teeth and adapters

    Change teeth before the adapter nose shows. An adapter with a loose pin hole or a cracked weld is cut off and a new one welded on.

  • Wear plate

    Wear plate and wear bars welded to the floor, sides, and heel, so they wear away instead of the bucket’s shell.

Cracked booms, loader arms, dozer blades, and couplers, welded on site

Cracks on heavy equipment start where load and welds meet: pin bosses, cylinder mounts, corners, and old repairs. Every digging cycle flexes the steel a little, so a small crack keeps growing until it’s fixed.

  • Excavator booms and sticks. Side loads, rock strikes, and fatigue crack them near pin bosses and cylinder mounts. A lasting repair drills the crack ends, removes the whole crack, and welds it back full depth.
  • Loader arms and frames. Torn welds at the arm mounts and brackets, welded back where the loader is parked.
  • Dozer blades. Cracked moldboards, push arms, and blade brackets repaired without trailering the dozer.
  • Skid steer attachments and quick couplers. Prying and stump work crack quick-attach plates at the corners and gussets. Worn latch openings get built back up so the attachment stops rocking.
  • The trailer that hauls it. A cracked equipment trailer frame, tongue, or ramp is trailer welding and repair work, and we do that on site too.
Monroe Mobile Welding welder running a bead on the yellow arm of a machine propped on a jack stand
A cracked arm welded with the machine blocked up on site.

Certified welders and 1,200+ projects since 2012

Chad Monroe has owned Monroe Mobile Welding since 2012. A weld on a boom or loader arm carries the machine’s full load, so these are the credentials that count.

Since
2012Owner Chad Monroe
Projects
1,200+Across Dallas–Fort Worth
Insured
LiabilityOn every job
Google
5.0 starsFrom our customers
  • AWS D1.1 certified welders. D1.1 is the American Welding Society’s code for welding structural steel, the same work as our structural welding on beams and frames.
  • API 1104 certified welders. API 1104 is the American Petroleum Institute’s standard for pipeline welding.
  • Licensed and liability insured, on the job site and around your equipment.

“Chris was able to mobilize to the site within two hour and had the frames all repaired and ready to go by the follow day! I sincerely apricated his ability to respond quickly with quality workmanship.”

Jeff Briscoe, Google review, September 2025

“He came in after another welder left a terrible mess. Welds looked amazing and held.”

Daniel Rotter, Google review, October 2025

“Chris has preformed great quality work every time. Very competitive pricing always my go to guy to get the job done right the first time.”

Justin Alkins, Google review, February 2025

How an on-site equipment repair runs

Three steps from the call to a machine back at work. Nothing gets loaded onto a trailer.

  1. Call (214) 501-8864

    Tell us the machine, what cracked or wore out, and where it’s parked. We’re open 24/7.

  2. We drive to the machine

    Job site, yard, pit, or ranch, anywhere across Dallas–Fort Worth. We’re often there within an hour.

  3. We weld it beside the machine

    Our certified welders make the repair where the equipment sits, at $100 to $300 an hour, and the crew goes back to work.

More questions about equipment and bucket repair

What is hardfacing?

A wear-resistant weld layer.

Hardfacing is hard alloy weld laid over the steel that takes the scraping, so a bucket’s lip, sides, and heel last longer. Monroe Mobile Welding hardfaces excavator buckets on site across Dallas–Fort Worth.

Should I repair or replace a worn excavator bucket?

Repair it while the shell is sound.

A bucket with solid sides and floor is worth a new cutting edge, adapters, and hardfacing. A floor worn through or a split side means pricing a new bucket. Call Monroe Mobile Welding at (214) 501-8864 and describe the wear.

Can you replace worn bucket adapters?

Yes, on site.

Monroe Mobile Welding cuts off worn weld-on adapters and welds new ones to the bucket lip where the excavator sits. Change teeth before the adapter nose shows, because a worn adapter shortens the life of every new tooth.

Do you repair skid steer quick attach plates?

Yes.

Monroe Mobile Welding welds cracked quick-attach plates and gussets, builds worn latch openings back up, and welds new universal plates onto skid steer attachments, on site across Dallas–Fort Worth.

Are your welders certified for structural repairs?

Yes, AWS D1.1.

Monroe Mobile Welding’s welders hold AWS D1.1, the structural steel welding code, and API 1104 for pipeline work. The business is licensed and liability insured and has finished more than 1,200 projects since 2012.

Machine down? Get a welder to it.

(214) 501-8864
  • Open 24/7, often on site within an hour
  • [email protected]
  • Monroe Mobile Welding, 2080 Eagle Pkwy, Fort Worth, TX 76177. We come to you.
Call (214) 501-8864 Email