Skip to content

Structural Welding in Fort Worth, TX

Monroe Mobile Welding sends AWS D1.1 certified welders to job sites across Dallas–Fort Worth to weld beams, columns, base plates, and stairs where they stand. More than 1,200 projects since 2012.

Tell us what’s going up or what got hit, and the site address. A welding truck is often there within an hour, day or night.

5.0 on Google
Welder joining steel beams on an open building frame
Code
AWS D1.1Structural steel
Also
API 1104Pipeline
Insured
LiabilityOn every job
Rate
$100–$300An hour
Arrival
Often within an hourWe come to the site
Open
24/7Nights and weekends
Since
2012Owner Chad Monroe
Projects
1,200+Across Dallas–Fort Worth

Beams and columns get welded where they’re set

Once a beam is set or a column is standing, it isn’t going back to a fabrication shop. Monroe Mobile Welding drives a welding truck to your job site and welds the structural steel in place.

A connection that waits holds up the deck crew, the framers, and the inspection behind it. We’re open 24/7 and often on site within an hour, so you can call the minute the steel is ready.

The weld also has to pass inspection and carry its load for the life of the building. Our welders are certified to AWS D1.1, the code your inspector checks structural welds against.

Welder on a scaffold welding a steel beam under a metal roof deck
A beam welded from a scaffold, under the roof deck.

Quick answers for contractors and site supers

Are your welders certified to AWS D1.1?

Yes, AWS D1.1 certified.

Monroe Mobile Welding’s welders are certified to AWS D1.1, the American Welding Society’s code for structural steel, and to API 1104 for pipeline work. D1.1 is the welding code the building code points to for welded steel.

How fast can you get a welder to my job site?

Often within an hour.

Monroe Mobile Welding is often on site within an hour of your call, driving from north Fort Worth. We’re open 24/7, so a crew waiting on a weld at night or on a weekend can call too.

How much does structural welding cost?

$100 to $300 an hour.

Monroe Mobile Welding charges $100 to $300 an hour for structural welding on your site. Tell us the steel, the connections, and the address when you call (214) 501-8864.

Are you insured for work on a commercial job site?

Yes, licensed and liability insured.

Monroe Mobile Welding is licensed and carries liability insurance on every job, commercial sites included, and has finished more than 1,200 projects across Dallas–Fort Worth since 2012.

Welder tied off in a harness, welding a white steel frame member outdoors
Field welds on a steel frame, tied off.

What AWS D1.1 means for your inspector and your GC

AWS D1.1 is the Structural Welding Code—Steel, published by the American Welding Society. Its 2025 edition sets the rules for fabricating and erecting welded steel structures, from connection design to the final inspection.

On a permitted commercial job, the building code calls for special inspection of structural steel welding (IBC Chapter 17), and that inspector works from D1.1. Before looking at a weld, the inspector checks two papers: the welding procedure specification (WPS) for the joint, and each welder’s qualification record.

  • Clause 6, Qualification. The tests every welder and tack welder must pass before welding structural steel.
  • Clause 8, Inspection. Who inspects, and the visual and nondestructive testing standards a finished weld has to meet.
  • Clause 11, Strengthening and Repair. The rules for welding on steel structures that are already standing.
  • Our welders: AWS D1.1 for structural steel, API 1104 for pipeline, and liability insured on every job.

For a general contractor, a failed weld means grinding it out, welding it again, and paying for a second inspection while the next trade waits. A D1.1 certified welder is the first thing that inspector looks for.

Structural steel we weld on site

New steel going up and old steel that needs fixing, on job sites across Dallas–Fort Worth.

  • Beams and columns. Beam-to-column connections, splices, and added framing on a standing building frame.
  • Base plates. Column base plates welded where the column stands.
  • Stairs and landings. Steel stair stringers, landings, and the rails along them.
  • Canopies. Steel canopies over entries, walkways, and loading docks.
  • Mezzanines. Mezzanine framing in warehouses, shops, and plants.
  • Brackets and frames. Supports for equipment, signs, and piping.
  • Repairs after damage. Columns, braces, and beams hit by a truck or forklift, or cracked at an old weld.

Stainless rails and fittings are on our stainless steel welding page. Cracked arms and frames on loaders and excavators are on heavy equipment welding and repair.

How a structural welding job runs on your site

Three steps, and the steel never leaves the job.

Welder in a harness welding on top of a steel roof frame against a blue sky
Welding on top of a roof frame.
  1. Call with the details

    Tell us the connections, the steel sizes, and the site address. If an engineer or inspector is on the job, say so on the call.

  2. We drive to the site

    The welding truck carries the welder and gas bottles on its bed. We’re often there within an hour, any hour.

  3. We weld it to D1.1

    Our AWS D1.1 certified welders weld the connections in place at $100 to $300 an hour, ready for your inspector.

What customers wrote after the job

Quoted word for word from Google reviews of Monroe Mobile Welding.

“I called Monroe Mobile Welding from out-of-state to have some frames we shipped to Texas repaired. Chris was able to mobilize to the site within two hour and had the frames all repaired and ready to go by the follow day!”

Jeff Briscoe, Google review, September 2025

“He came in after another welder left a terrible mess. Welds looked amazing and held.”

Daniel Rotter, Google review, October 2025

“His attention to detail and professionalism set him apart, and he works quickly without cutting corners.”

Aaron Ibarra, Google review, February 2025

More questions about structural welding

Can you repair a beam or column that’s been damaged?

Yes, in place.

Monroe Mobile Welding repairs damaged structural steel where it stands, from a column hit by a forklift to a cracked brace. AWS D1.1 covers this work in Clause 11, Strengthening and Repair of Existing Structures. Your engineer sets the repair detail, and we weld it.

What does an inspector check on a structural weld?

The paperwork, then the weld.

Under AWS D1.1, the inspector checks the WPS and each welder’s qualification record, then inspects the finished weld visually. Drawings may also call for ultrasonic or magnetic particle testing. Monroe Mobile Welding’s welders hold AWS D1.1 certification.

Does a welder’s D1.1 certification expire?

Not while the welder keeps using it.

Under AWS D1.1, a welder’s qualification stays in effect unless six months pass without welding in that process. Monroe Mobile Welding has welded steel across Dallas–Fort Worth since 2012.

What do 1F, 2F, 3F, and 4F mean in welding?

Weld positions.

They’re the four fillet weld positions: 1F flat, 2F horizontal, 3F vertical, and 4F overhead. A G marks a groove weld instead. Welds on a standing frame are often 3F or 4F, up a column or under a beam. That’s the work Monroe Mobile Welding does on site.

We weld structural steel on job sites across Dallas–Fort Worth, including Haslet, Keller, Northlake, and Saginaw.

Need a structural welder on your job site?

(214) 501-8864
  • Open 24/7, often on site within an hour
  • [email protected]
  • Monroe Mobile Welding, 2080 Eagle Pkwy, Fort Worth, TX 76177. We come to you.
Call (214) 501-8864 Email