Mobile Welding in Southlake, TX
Monroe Mobile Welding drives its welding truck about 15 miles from north Fort Worth to Southlake homes, horse properties, and businesses. We’ve finished more than 1,200 projects since 2012.
Call with the gate, rail, or trailer that broke and the Southlake address. A welder is often there within an hour, any time of day.
5.0 on Google
- Open
- 24/7Call any hour
- Arrival
- Often within an hourAt your Southlake address
- Drive
- About 15 milesNorth Fort Worth via TX-114
- Rate
- $100–$300An hour
- Certified
- AWS D1.1 · API 1104Our welders
- Insured
- LiabilityHomes and businesses
- 5.0 starsCustomer reviews
- Projects
- 1,200+Since 2012
Iron gates, pool fences, and railings welded at Southlake homes
Gates, railings, and pool fences are set in concrete or hung on posts, so none of them can go to a shop. Monroe Mobile Welding repairs them in place, and a heavy driveway gate stays on its hinges while we work.
- An iron driveway gate that drags, sags, or snapped at a hinge
- A pool gate that no longer swings shut and latches on its own
- A stair, porch, or balcony railing with a cracked joint or a loose post
- Pipe fence and pasture gates on a horse property
Southlake inspects pool barriers under the 2021 International Swimming Pool and Spa Code, adopted by Ordinance 1254. The city’s pool guidelines say a walk-through pool gate opens outward, away from the water. At a home pool, an outside latch release sits at least 54 inches above the ground.
A bent post or a worn hinge pulls a pool gate out of line, and then it stops closing and latching. We weld the hinge, the post, or the latch bracket back where it belongs, right in the backyard.

Reviews from Monroe Mobile Welding customers
Copied exactly from our Google reviews, where we hold 5.0 stars.
“They have completed several jobs for me. Fences, gates, repairs, specialty fabrication, etc. Every project has been a slam dunk. Chris is especially nice and very easy to work with.”
“Chris was highly professional, and communicated throughout the job. He came in after another welder left a terrible mess. Welds looked amazing and held.”
“Chris has preformed great quality work every time. Very competitive pricing always my go to guy to get the job done right the first time.”
“He is very professional, he does a great job in a timely manner. I highly recommend this guy.”
“100% Quality welds and fast work”
Every welding service, brought to Southlake
Gates and railings lead the list here, and the truck carries the same work to offices, building sites, and barns. Tap a service for its full page.
-
Gate, Fence & Railing Welding
Iron driveway gates, pool gates, stair rails, and pipe fence repaired where they stand.
-
Structural Welding
Beams, columns, and canopy steel for offices, shops, and the flex buildings off Kimball Avenue, by AWS D1.1 certified welders.
-
Stainless Steel Welding
Stainless handrails, tubing, and fittings for restaurants and storefronts, Southlake Town Square included.
-
Aluminum Welding
Aluminum boat trailers, ramps, and truck boxes, fixed before your next day on Grapevine Lake.
-
Trailer Welding & Repair
Cracked horse trailer frames, broken tongues, and gooseneck hitches, fixed where the trailer is parked.
-
Heavy Equipment Welding & Repair
Loaders, dozers, and excavators on building sites and at the concrete and fuel yards on Southlake’s east side, off TX-114.
-
Excavator Bucket Hardfacing
Worn bucket edges built back up with a hard-wearing weld bead, so the bucket keeps digging.
-
24/7 Emergency Welding
Gates stuck open, trailers broken down, and rails pulled loose, after dark or on a Sunday.

Emergency welding in Southlake, day or night
A driveway gate stuck open at midnight, a horse trailer hitch that cracked on TX-114, a pool gate that won’t latch with kids home all weekend. Monroe Mobile Welding is open 24/7 and often reaches Southlake within an hour.
Another welder didn’t show, or left the repair half done? Call anyway. Daniel hired us after another welder left a mess, as his review above says.
From your call to a finished weld in Southlake
Three steps, and nothing gets loaded onto a trailer or hauled off to a shop.

Call (214) 501-8864
Say what broke, whether it’s iron, steel, aluminum, or stainless, and give us the Southlake address. Any hour works.
We drive over on TX-114
It’s about 15 miles from our north Fort Worth base, and we’re often there within an hour.
We weld it in place
A certified welder makes the repair at $100 to $300 an hour, and the gate, rail, or trailer goes back to work.

Who comes to your Southlake property
Chad Monroe owns Monroe Mobile Welding, which has worked out of north Fort Worth since 2012 and has more than 1,200 projects behind it. Here’s what each Southlake job comes with.
- AWS D1.1 certification. It’s the American Welding Society’s code for welding structural steel, such as beams and columns.
- API 1104 certification. It’s the American Petroleum Institute’s standard for pipe and pipeline welds.
- Liability insurance at homes, horse properties, and business sites.
- A 5.0 rating on Google, from customers like the ones quoted above.
Southlake and the towns next to it
We cover all of Southlake, the Tarrant County side and the Denton County side, plus the neighboring towns below.
- Drive from our base
- About 15 miles, I-35W to TX-114
- Arrival
- Often within an hour, 24/7
- Jobs here
- Gates, pool fences, railings, horse fence, trailers, and business steel
- Rate
- $100 to $300 an hour
- Colleyville
- Flower Mound
- Grapevine
- Keller
- Roanoke
- Trophy Club
Southlake welding questions
How long does it take a welder to reach Southlake?
Often within an hour.Monroe Mobile Welding drives about 15 miles from 2080 Eagle Pkwy in north Fort Worth, mostly on TX-114, and is often at a Southlake address within an hour of your call.
Can you fix a pool gate that won’t latch?
Yes, on site.Monroe Mobile Welding welds sagging hinges, bent posts, and loose latch brackets in place. Southlake’s pool code has walk-through gates open outward, away from the pool, with a home pool’s outside latch release at least 54 inches up.
Do you weld pipe fence and gates on horse properties?
Yes.Monroe Mobile Welding repairs pipe fence, pasture gates, and horse trailers on Southlake acreage, bringing the welder to the fence line at $100 to $300 an hour.
Do you work at Southlake businesses?
Yes, commercial too.Monroe Mobile Welding welds railings, canopy steel, and structural members for Southlake offices, shops, and flex buildings. Our welders hold AWS D1.1 certification for structural steel.
What does mobile welding cost in Southlake?
$100 to $300 an hour.Monroe Mobile Welding charges $100 to $300 an hour in Southlake, the same rate we charge across Dallas–Fort Worth. Call (214) 501-8864 and describe the job.
Need a welder in Southlake?
(214) 501-8864- Open 24/7, often in Southlake within an hour
- [email protected]
- Based at 2080 Eagle Pkwy, Fort Worth, TX 76177. We drive to Southlake.